2nd Gen Non-Engine/Transmission Suspension boots

[AMink]

Some of the rubber boots over my front suspension joints are worn/cracked. Is there anywhere (besides the dealer) that sells a replacement kit with all the boots? If I let them go the way they are, my joints will wear out and then I'll have to get a new upgraded suspen... Hmmmm

 

[Glen Pratt]

Are you talking about your tie rod and drag link end boots? If that's what you mean, Energy Suspensions makes polyurethane boots in red and black for our trucks.

<TABLE height=724 cellSpacing=0 cellPadding=0 width=561 bgColor=white border=0 cool gridx="8" showgridx usegridx gridy="8" showgridy usegridy><TBODY><TR height=43><TD vAlign=top align=left width=544 colSpan=9 height=43 xpos="16"><TABLE cellSpacing=0 cellPadding=4 width=531 border=0><TBODY><TR><TD>

[font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]Energy Suspension [/font][font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]®
[/font]​

</TD></TR></TBODY></TABLE></TD></TR><TR height=16><TD width=1 height=16><SPACER type="block" width="1" height="16"></TD><TD width=13 height=16><SPACER type="block" width="13" height="16"></TD><TD width=2 height=16><SPACER type="block" width="2" height="16"></TD><TD vAlign=top align=left width=313 colSpan=7 height=16 xpos="15"><TABLE height=15 cellSpacing=1 cellPadding=0 width=302 align=left bgColor=white border=0><TBODY><TR height=13><TD vAlign=center align=left bgColor=white height=13>

[font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]TIE ROD DUST BOOTS[/font]​

</TD></TR></TBODY></TABLE></TD><TD width=189 height=16><SPACER type="block" width="189" height="16"></TD><TD width=26 height=16><SPACER type="block" width="26" height="16"></TD><TD width=17 height=16><SPACER type="block" width="17" height="16"></TD></TR><TR height=15><TD width=1 height=15><SPACER type="block" width="1" height="15"></TD><TD width=13 height=15><SPACER type="block" width="13" height="15"></TD><TD width=2 height=15><SPACER type="block" width="2" height="15"></TD><TD vAlign=top align=left width=545 colSpan=10 height=15 xpos="15"><TABLE height=15 cellSpacing=0 cellPadding=0 width=529 border=0><TBODY><TR><TD></TD></TR></TBODY></TABLE></TD></TR><TR height=1><TD width=1 height=1><SPACER type="block" width="1" height="1"></TD><TD width=13 height=1><SPACER type="block" width="13" height="1"></TD><TD width=2 height=1><SPACER type="block" width="2" height="1"></TD><TD width=1 height=1><SPACER type="block" width="1" height="1"></TD><TD width=22 height=1><SPACER type="block" width="22" height="1"></TD><TD width=9 height=1><SPACER type="block" width="9" height="1"></TD><TD width=150 height=1><SPACER type="block" width="150" height="1"></TD><TD width=1 height=1><SPACER type="block" width="1" height="1"></TD><TD width=11 height=1><SPACER type="block" width="11" height="1"></TD><TD width=119 height=1><SPACER type="block" width="119" height="1"></TD><TD vAlign=top align=left width=215 colSpan=2 height=115 rowSpan=3 xpos="328" csheight="107" content>[font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]Made of [/font][font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]HYPER-FLEX[/font][font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]™[/font][font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular] Performance Polyurethane.
(A) Seals tight at tapered shaft
(B) Sharp edge helps seal-in lubricant
(C) Inside radius of boot works with rod socket as a wiper
(D) Extra sealing lips
(E) Barrel shaped for a better fit[/font]</TD><TD width=17 height=1><SPACER type="block" width="17" height="1"></TD></TR><TR height=19><TD width=1 height=19><SPACER type="block" width="1" height="19"></TD><TD width=13 height=19><SPACER type="block" width="13" height="19"></TD><TD width=2 height=19><SPACER type="block" width="2" height="19"></TD><TD vAlign=top align=left width=182 colSpan=4 height=114 rowSpan=2 xpos="15">#ad
</TD><TD width=1 height=19><SPACER type="block" width="1" height="19"></TD><TD width=11 height=19><SPACER type="block" width="11" height="19"></TD><TD width=119 height=19><SPACER type="block" width="119" height="19"></TD><TD width=17 height=19><SPACER type="block" width="17" height="19"></TD></TR><TR height=95><TD width=1 height=95><SPACER type="block" width="1" height="95"></TD><TD width=13 height=95><SPACER type="block" width="13" height="95"></TD><TD width=2 height=95><SPACER type="block" width="2" height="95"></TD><TD width=1 height=95><SPACER type="block" width="1" height="95"></TD><TD vAlign=top align=left width=130 colSpan=2 height=95 xpos="198">#ad
</TD><TD width=17 height=95><SPACER type="block" width="17" height="95"></TD></TR><TR height=15><TD width=1 height=15><SPACER type="block" width="1" height="15"></TD><TD width=13 height=15><SPACER type="block" width="13" height="15"></TD><TD width=2 height=15><SPACER type="block" width="2" height="15"></TD><TD vAlign=top align=left width=502 colSpan=8 height=15 xpos="15"><TABLE height=15 cellSpacing=0 cellPadding=0 width=500 border=0><TBODY><TR><TD></TD></TR></TBODY></TABLE></TD><TD width=26 height=15><SPACER type="block" width="26" height="15"></TD><TD width=17 height=15><SPACER type="block" width="17" height="15"></TD></TR><TR height=86><TD width=1 height=86><SPACER type="block" width="1" height="86"></TD><TD width=13 height=86><SPACER type="block" width="13" height="86"></TD><TD width=2 height=86><SPACER type="block" width="2" height="86"></TD><TD width=1 height=86><SPACER type="block" width="1" height="86"></TD><TD width=22 height=86><SPACER type="block" width="22" height="86"></TD><TD vAlign=top align=left width=159 colSpan=2 height=86 xpos="38">#ad
</TD><TD vAlign=top align=left width=346 colSpan=5 height=86 xpos="197" csheight="71" content>[font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]Ordering Examples:If A measures . 630" at the largest taper and B measures 1. 400" at the top of the socket use-
PT# 9. 13101R, round, red in color
PT# 9. 13102G, octagon, black in color[/font]</TD><TD width=17 height=86><SPACER type="block" width="17" height="86"></TD></TR><TR height=32><TD width=1 height=32><SPACER type="block" width="1" height="32"></TD><TD width=13 height=32><SPACER type="block" width="13" height="32"></TD><TD width=2 height=32><SPACER type="block" width="2" height="32"></TD><TD width=1 height=32><SPACER type="block" width="1" height="32"></TD><TD width=22 height=32><SPACER type="block" width="22" height="32"></TD><TD width=9 height=32><SPACER type="block" width="9" height="32"></TD><TD vAlign=top align=left width=470 colSpan=5 height=32 xpos="47" csheight="25" content><CENTER>[font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]Available Colors / Color Codes: G for black, R for red. Example: 9. 13101R = Red[/font]</CENTER></TD></TR></TBODY></TABLE>

 

[Glen Pratt]

Prothane makes them as well. http://www.prothane.com

 

[AMink]

Thanks! Actually, I think they just keep the grease in where zerk fittings are. I'm sure I need all new rubber all over. I'll check these places out.

 

[AMink]

Thanks! Actually, I think they just keep the grease in where zerk fittings are. I'm sure I need all new rubber all over. I'll check these places out.





Just looked closer at the pics. That is probably what I'm looking for.