Here I am

2nd Gen Non-Engine/Transmission suspension lift?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
Ok I know this has been addressed before but I need some info.

I have a 2002 have the camper package snow plow prep and the and the tow package. My question how much lift do I need to clear 35x12. 50' s A couple places have told me 4" 5' and 6" who has done it and what have they done? Any help would be great.



Thanks

Jonathan
 
I have the skyjacker 4. 5 lift and i am clearing 37/ 12. 5. You might be able to clear them if you just add a coil spacer in there. I getting ready to sell my coils though. The weight of my truck has made them sag down to about 3 inches over stock thats why i have the coil spacer in there.



trey
 
I'm running 36. 4 x12. 0 tires with a 3" coil spacers in the front and 1" lift in the rear - and I didn't start with the snow plow or camper packages. You should have no problem with 35 x 12. 50's with 3" and probably even 2" (might rub on control arms at full lock turn with stock wheels). My tires have never touched anywhere even with some moderate 4-wheeling. I only added the 1" in the rear because it looked nose high otherwise.



Hope that helps.
 
Jonathan, If you want to wait a few week i will have my coils off. They might work out good for you. like i said they are suppose to be 4. 5 but with a 3 inch coil spacer the truck sits level with the rest of the 4. 5 kit. They might work out good for you. Or just get a coil spacer and be finished with it.



Trey.
 
I love this web site there are so many good people on here. Hey guys thanks I have a friend that is getting me the lift wheels and tires for cost plus 300. 00 to install it I appeciate the info though.



Jonathan
 
Status
Not open for further replies.
Back
Top