2nd Gen Non-Engine/Transmission Suspension Parts

[DieselNasty]

Are the parts coming off the suspension the same on a 94 and a 97? Can they be interchanged?



Thanks

 

[Alphacowboy]

I wana say the suspension is the same from 94-99. in 2000 they changed the bolt size for the control arms up front. other than that, i dont know of any differences

 

[JFaughn]

When I was looking at this my first CTD, I heard that the bar that ties the frame to front axial , the weak point on these trucks , the shaft on the ball joints came in two sizes , early and late 94, biger on late as an upgrade. hope this is some help.

 

[Hammer]

Suspensions fits are as follows so the Hollander E-Book says...



94-98 Ram 2500/3500-front upper,front lower are the same

99-2002 Ram 2500/3500-front upper,front lower are the same



Hope this helps..... Andy

 

[DieselNasty]

Thanks for all the information, it helps.

 

[msmithac]

Would one of you fine members with a Hollander access, look up a exchange for me? I am restoring a 70 American Motors AMX. The gas tank has several hole in it, and I need to know what other models used the same tank. Thanks to anyone who can help

 

[JFaughn]

Off origanal subject but here we go, there is a company that makes fuel tanks , mounting straps , exhaust manifolds and few other factory parts , they advertise in motor magazine, depending on your access to price, my cost was averaging 120. 00 for a new tank& straps, I'ld give you more info but my internet access is at a coffee shop and I no longer have the shop.