Here I am

Taking off the panel that covers the radio and heater controls

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Brakesmart Install

What Gauge to use?

Status
Not open for further replies.
I have a 2004. 5 Laramie H package. This has the satin finish panel that covers the radio, heater, and the heated seats buttons... question is how do I remove that panel to remove my radio?
Thanks!
 
JGraham said:
I have a 2004. 5 Laramie H package. This has the satin finish panel that covers the radio, heater, and the heated seats buttons... question is how do I remove that panel to remove my radio?

Thanks!





remove the one screw above the trash bag hook on the pass side, then open up the ash tray, cupholder [if you got one there] and maybe pull down the drivers side knee blocker piece. then grab an edge and pull it away. the HVAC controls are attached to that panel, as are the heated seat buttons so the connectors will need to be removed from the controls, also on the lighter, and air bag cutout switch or blanking plate [the wire is there even if the switch isn't]... pretty easy. opening up the ashtray/cupholder/knee pad help prevent scratching the panel.
 
Look

Look at my readers rigs... . I have a whole album on an after market deck install... . everything you will need is there. Let me know what you think and if it helped.



Colonel
 
Status
Not open for further replies.
Back
Top