The "Humbler" awaits.....Kauffman's Dyno Roll..

[Hammer]

Well its been a while now,so here we go again... .



The M-D TDR cahpter is having a Pre-Fall Brawl tune-up spin at the "New" Kauffman Motorsports facility.



Date... . Saturday August the 16th

Time... . 8am till ?????

Where... . Kauffman Motorsports... Dillsburg,PA



This will be a bring a covered dish cookout also so add what you are interested in bringing to eat. The New Kauffman's facility is a sight to see and has alot more room than the old one. It is also much easier to find so no one will get lost,not even me LOL. I'll add a link to their website and stick up directions also.



http://www.kauffmanmotorsports.com/main.htm



Post up gang and let us know who is interested and what they want to bring along... ... ... ... ... . Andy

 

[Hammer]

directions.....

Kauffman Motorsports (717)502-8880



901 Range End Road



Dillsburg, PA 17019



From the North & East...



-Take US Rte 15 South into the town of Dillsburg.

-Upon leaving Dillsburg heading south you'll go up a hill.

-Continue over the top and start down the other side and you'll see a camper sales called "Etnoyers".

-Turn right there and Kauffman's is the large tan building on the left.



From the south...

-US 15 North past the previous turnoff(Latimore Valley Road) for the old facility.

-Continue northbound till you begin to climb the hill towards Dillsburg. (there is a old garage on the bottom on the right and a antique shop along side it)

-Get in left lane going up the hill and begin looking left and you will see Etnoyers.

-Turn left there and Kauffman's is on the left,large tan building.



Those who use mapquest remember their address is the old Rte 15 and it runs directly behind them. Its easy to find and you won't get lost as easy... ... ... . Andy



Cost is $60 for 3 spins with torque readings...

 

[jstyer]

See you guys there. Oo.

 

[Rams-n-Hogs]

You know I'll be there. I just want to see if my truck runs better than last year. I'll bring the grill, and some burgers. Maybe this year the grill won't be in the back of the truck while it's on the rollers. See ya'll there.



Jim

 

[llawrence]

i am gonna try to make this one for sure. I wanna spin the rollers to see if a couple little mods i made helped out. When i know for sure i'll post what i can bring. Hope to see you all there.

Larry

 

[c-hawk]

I hope to be there, but it doesn't look like it is going to happen. I think that's the weekend I need to help my little brother move to college. If something changes with that then I will be there.



Chris

 

[Larry Willard]

just a reminder, we have a box with napkins, plateds plastic silverware,several bags of chips, and charcoal, left fron Saturdays picnic. I think there is someting else in there but don't remember for sure.

Larry

 

[tabell]

Wrenching

For your viewing pleasure we will also be showing how to install D25 Skyjacker springs, 1/2" longer DT control arms, and DT Trackbar.

 

[Jeff Knight]

I'm going to try and make it. Jeff

 

[llawrence]

convoy??

are any of you guys gonna run up together? say from like the Lancaster area? I am planning on going, but am not 100% sure how to get there so if anyone is running in close by maybe we can meet up somewhere. Let me know. See everybody there.

Larry

 

[fest3er]

I shall do my best to be there. And I'll bake a cake. Like all you guys, I want to have my cake and Edith, too.

I don't *think* I'm going to MN 'til September. Think I'll try to get Dad out there for the harvest. It's been a few years since I combined beans and hauled 'em to town.

Fest3er

 

[Hammer]

Our very own lost child Larry chimed in. . WOW... . LOL



Larry. .

If ya feel daring you could come over and follow me up from York. Now don't let all those guys scare you away with those stories about me getting them lost or touring various industrial parks. Just make sure you have the tank all bellied up full and your in like flint. BTW,You'll not end up out on the same farm road as before I hope. Last time i still have not figured out how ya ended up there(sheesh,and it wasn't even my fault that time). BTW,coming from the Coatesville area where you are it would be alot easier for you to come across the turnpike and go south on Rte 15. The new shop is just a few miles south of the last traffic light in Dillsburg... ... ... . Andy

 

[offshoreracr]

As long as I don't break on the 10th at QC, I will be there to dyno. I can bring anything that is needed. Fred

 

[llawrence]

Hey Andy..... good to hear from ya buddy. As far as that farm road goes don't ask b/c i don't even know how i got there!!! Good thing i saw you or i might still be driving that road.

Anyway... . i think that it would be cool to meet up with you and follow you down. That is if i can find my way to York. IS there a # where i can reach you to discuss this further? I have a NEXTEL phone. My # is (610) 842-8989 My private ID # is 168*22*48989 feel free to give me a call if ya want or post a # where i can reach you. Hope to hear back from ya soon so we can make an attack plan. Talk to you soon.

Larry

 

[Hammer]

Larry. .

I just dropped a PM to you with numbers to reach me. I believe that Proram is going up with me also,but,I'll confirm that first. Give me a jingle... ..... Andy

 

[tom sweeney]

eileen and i plan on coming..... im looking for VOLUNTEERS to help install a Luke's-Link on my '01... . any help/suggestions/advice will be appreciated !!!..... cya there... tom... ('specially HELP) lol

 

[Jeff Knight]

If I don't have to work I will be there. Hey Larry, If you decide to come across the turnpike I can meet you on 15 if you would like. Tom, I'm game to help you with your Luke's Link. Let me know if there is anything I need to bring. I can swing a mean HAMMER. Jeff

 

[llawrence]

Hey Jeff, thanks for the invite, but it looks like i am meeting up with Hammer. I am supposed to meet Andy, Scott(ProRam) and a couple other guys (i think) at the Rutters off of Rt30 at Rt24. Andy and i and the other guys plan on meeting there at 7am if anybody else is interested. The more the merrier.

Larry

P. S. Andy correct me if i am wrong about the RT 24 thing, but i think thats what you told me.

 

[tom sweeney]

... thanks jeff... i appreciate it... ;-)... ... ... tom

 

[MD500E]

Larry, it look like I am going to be able to make it. Maybe we can convoy out to meet up with the other guys. I don't know for sure until about a day or two before, but its looking good so far!!. If you want we could meet up at the downingtown or the morgantown entrance of the turnpike.



Kevin