The most intense guages yet! DEFi steps up

[ToolManTimTaylor]

Of course looking for the NEXT best thing A buddy tipped me off to DEFI's New series of guages. Found Here



Defi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect.



Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System. " Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.



Key Off

#ad




Key On

#ad






Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled.



Driving data can be stored and can be replayed up to 3 minutes.



Double Warning function by a meter's LED lamp and a beep



If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light.



Defi-Link Indicators can be connected to each gauge.



Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.



Defi-Link Control Unit II is necessary to operate Defi-Link Meter BF.



Defi-Link Meter BF is applicable only for 12V vehicles



<hr>

However if ya want to REALLY impress yourself:



Tie ALL the guages into a central monitor that will recored peak values and data Here

 

[nickleinonen]

nice gauges, but very $$$$$. and the boost gauge reads vacuum when we don't need it, and it only goes to 2 bar [at least in that pic] so that's 30 psi. if it went to 4 bar and no vacuum, that would be ok...

 

[ToolManTimTaylor]

From what i understand they do have OTHER boost aplications. That just shows standard product line units.

 

[PhillySingle]

Ahh... Defi gauges! These have been around (known to) the import world for some time. I know alot of guys running Defi in their Supras.



To the best of knowledge, Defi boost does only goto 2bar - Greddy makes a 3bar gauge... but even that isn't enough for us.



If there is a super-secret 4bar Defi gauge - by all means let us know - I know the Supra world would buy them in a heartbeat.



Jay

 

[cyborg]

I looked and they don't read good ole american PSI.

 

[ToolManTimTaylor]

I eagerly await an email from them direct Oo. I sent it three days ago.

 

[ToolManTimTaylor]

Start Emailing Boys!!!

Subj: Re: Defi Inquiry

Date: 5/12/2004 2:42:23 AM Eastern Daylight Time

From: "Defi Shop" <defishop@nippon-seiki.co. jp>

To: <ToolManTimTaylor@aol.com>

Sent from the Internet (Details)









Thank you very much for your inquiry.



We're sorry but we don't have a plan to release BF boost gauge that can read a wide range of

parameters. If there is much demand, we will design it.

Your opinion would be very helpful to plan and design new products.



We are sorry we can't meet your request.



Thank you,

Defi

******************************

Defi Business Division

URL: http://www.defi-shop.com

E-mail: defishop@nippon-seiki.co. jp

******************************



----- Original Message -----

From: <ToolManTimTaylor@aol.com>

To: <defishop@nippon-seiki.co. jp>

Sent: Wednesday, May 10, 2004 1:31 PM

Subject: Defi Inquiry







-----------TOP OF INQUIRY-----------

nameFTim Taylor

E-MailFToolManTimTaylor@aol.com

email2FToolManTimTaylor@aol.com

whenFfirst

yearFno answer

monthFno answer

ageF30 to 34

countryFUSA

productFLink Meter BFs

shop nameFShop Name

shop addressFShop Address

where buy3Fonline

where buyF

question F



Hello, I am inquiring about the BF series guages. In the High performance diesel world (400 + 800

rwhp) there is a constant need for guages that can read a WIDE range of parameters. Typical and most

common boost readings for an average Mid Horsepower level up to 500 rwhp can range between 0 and 50 psi. 500+ rwhp

applications can see boost levels as high as 110 psi in a Twin Turbo aplication. EGT ranges from 0 1800 MAX so boost is our #1

concern. Being no

Vaccuum is produced in any Turbodiesel application there is extra room for the larger number sweep.

There is a rather LARGE calling for this and was wondering if production could be seen.



Thanks for the time,



Tim

makerFDodge

modelFRam

ccF360 DIESEL

yearF2001

typeF

gearFautomatic

SendFSend



-----------END OF INQUIRY-----------

 

[PhillySingle]

interesting... I wonder how much is "enough" demand!? I'll get this info posted over on Supraforms.com as well - there is alot of demand there for gauges that read alot higher than 2bar (29psi) as well.



Hopefully we can get alot of emails sent to them!



Jay

 

[ToolManTimTaylor]

Subj: Re: Defi Inquiry

Date: 5/13/2004 1:04:07 AM Eastern Daylight Time

From: "Defi Shop" <defishop@nippon-seiki.co. jp>

To: <ToolManTimTaylor@aol.com>

Sent from the Internet (Details)









Thank you for your inquiry.



We have distributors in USA and only accept requests for new product development from our

distributors based on some conditions such as minimum order quantity for one year.

So, please contact with the following company:



EDO PERFORMANCE LLC

Edwin Tang(Mr. )

401 Little Texas Ln #1223

Austin Texas 78745

U. S. A.

Tel & Fax: 1-512-462-0125

URL: http://www.edoperformance.com

E-mail: -- email address removed --



Thank you,

Defi

******************************************

Defi Business Division

URL: http://www.defi-shop.com

E-mail: defishop@nippon-seiki.co. jp

 

[ToolManTimTaylor]

Anybody fire off any emails to boost demand? I updated Philly Single's thread with a possibility of a guage release for PSI boys in the 40+ lbs dept.

 

[Vaughn MacKenzie]

My such beautiful gauges, but not very applicable for our trucks