The tingamajig

[Archive]

The rod that attaches to the front passanger 4X4 axle then attaches to the driver frame with a ball joint has about 2"-3" of give. #ad
I'm not front end inclined so how much is to much and is the ball joint end replacable or do you have to buy the hole rod??

Thanks

Mac

------------------
95 Ram 2500 Auto Std Cab, Cat & Muffler Fell off, 125,000 miles.
Bombed-to-be!

 

[Archive]

If it's a ball joint, that's way too much give. Sounds like the panhard rod. It keeps the whole marianne from going right to left. Ck with the Pep Boys, Allied & other parts houses 1st, before the dealer.

------------------
Money Sink - 96, 5 speed, Injectors, 280/685 & AFC housing slid.
4" CAT back & CATless, 4" chrome turn down straight out back.
ISSPRO Pillar, Delvac 1 & Amsiol, K&N, Monicas silencer ring removed, Exhaust brake, Mag-Hytec, 3:54, 235s.
HX35s days are numbered, HX40-16 is here.
Un-Bombed = Boring

 

[Archive]

Trackbar. Folks seem to prefer NAPA auto parts as the source, because of lifetime warranty.

 

[Archive]

RCMC,for sure trackbar or panhard rod(same thing)Book says amount of allowable play is in the hundredths of an inch. Napa is good, $169 for lifetime warrenty,you will have to replace it again and again. I aways called these things stabilizer bars as do most parts houses I've dealt with,I think Dodge may be the only one to call it a trackbar.

 

[Archive]

I'll second that Joe. Description seemed to be track bar. How is the truck handling on the road Mac.

 

[Archive]

Missouri, It drives ok dosen't wander as much as I would think. But A soon as some funds come I think I'll get a new one. Don't want to be haulin down the road and watch the front end slide out #ad
that probably wouldn't be a good thing.

Thanks for all the help

Mac