2nd Gen Non-Engine/Transmission Those already running 285/75

[baby.driver]

I already posted this but perhaps as a new topic I can get better feedback.



Jay



Here is my concern/question

Yesterday I had Bridgestone Dueler AT in 285/75/16 Installed.

With the wheel straight ahead, The outer edge is making contact with the pavement but the inner edge is not. (front tires). My shop manual says there is no adjustment for camber.

When changing the upper ball joint I saw the sleeve has a number on it, leading me to think there are other sleeves with other numbers, maybe the way to set them up at the factory.

Are the other sleeves obtainable? Would I screw something up lessening the amount of camber?

With the prior 235/85s I had on I could see the excessive wear on the outer edges but just kept rotating to try and keep up. I can tell with these wider/taller tires this wear will be aggravated.

Comments Please?



Jay





__________________

96 4X Club 5sp. mit plenty much goodies meester.

Setup by Jim Leonard

 

[pcorssmit]

I would have an alignment done, and make it clear to the tech what you are concerned about, and that you are willing to fix it. And yes, offset sleeves are available, however standard ones are centered.



Pete