"Tie Rod Puller #8677"

[PDDailey]

Anyone know which NAPA or anyother puller number would cross reference with a MOPAR #8677 tie rod puller?



Thanks

 

[UAV]

A good hit with an engineering hammer to the cast portion the tapered end is seated in usually does the trick. Make sure to loosen the nut a few threads before doing this.

 

[TBartlett1]

Advance Auto sells a front end tool kit that has the tierod puller, pitman arm puller and a few variations for most applications. The puller you mention is a generic tool that works on most vehicles.

KD tools has a nice kit for $88. 00 p/n KDS41690.

I used the hammer method in the past but I prefer this tool, it works very nice. No struggling or missing the target & buggering something else up.