2nd Gen Non-Engine/Transmission tie rod question

[motohead84]

I am looking to see what other TDR members have to say about tie rods. I need to replace mine and am looking at my options. I want something strong, as i think this it is the last thing to replace to get rid of my wandering. I already replaced the Box with a heavy duty one, put on a moog suspension drag link, ball joints, and of course the DSS kit. Maybe I also need to replace the steering shaft?



Thanks in advance for all your great advice.



andrew

 

[CumminsPower98]

If you can afford it this is the setup I would like to get some day.

http://www.bulletproofsteering.com/

 

[dresslered]

That bulletproof system looks pretty sweet (wish I had known about it). I just got through installing Moog ball joints, tie rods and track bar. To finish the job I added the DSS and Rancho RS5404.

 

[PUMPERDUDE]

Hope this isn't a stupid question but have you checked/replaced the trac bar?If it is worn you'll never get it going straight... ... I did just change the passenger side tie rod end. It was shot. . The rest of them were still tight. Not bad for 223k miles. It was causing a "very slight" pull to the right and excess tire wear. Good luck