TIME TO PASS THE TORCH

[Mike Vonada]

Well guys I am passing the torch to someone else to moderate the 24 valve forum.
I just went into partnerships in an off-road shop building 4X4's so don't have the time necessary to put into the forum.
I will still be around as I am looking at some customs fabs for the Ram 4X4, like the d*** track bar. Will keep you posted on any improvements for the Ram.
You all be good and I look forward to reading you threads from time to time.
Mike

------------------
2001 4X4 ETH 6 spd, QC, SLT,SB, 3:54, Flame Red,camel tan leather, 4" exhaust turbo back, EGT,boost guages, Stage III injectors, TST PM3 adjustable box, Mcleod clutch, Line-X bedliner.

-------------------------
Project that got way out of hand: total "BOMB"
95 Wrangler 4. 0L, NV4500, Reverse cut Dana 60 rear 44 front, Altas II, Quarter Eliptic suspension in rear, coils up front, Warn 10,000 lb to turn me right side up and the list goes on!

 

[WCrovo]

Thank you and good luck.

------------------
2001 2500 tow, camper, SWB, ETH/DEE, 3. 54 Bright white,4 wheel discs.

 

[Shleets]

Mike, Where is your shop located? I am from So. Ca. and would love to give you guys my business.

MS

 

[Pete Peterson]

See ya Mike, from the East side!!!! Pete

 

[Dak - BD Power]

Well done Mike, enjoy your new found time, oops I guess you'll need to requisition a couple more hours to be added to your day #ad
good luck in your endevours...

Heh, just a thought... Piers (aka SCOURGE Of The NORTH) is running a 24 Valver now, maybe he wants the job #ad


------------------
Real BOMBers never get speeding tickets. . just a lot of warnings!

 

[willyslover]

Mike. . keep in touch and e-mail the 4x4 crowd with your shops ability and parts. . the CJ [jeep] guys also

Also a suggestion. . get the info from Steve St. Laurent... on the traction bar he had fabed up and installed and be the west coast guy for them. . way cool bar !!

BTW I would be one of the CJ guys #ad
#ad

[let me know when your headding to the Con for a run if my CJ is up and running might join ya]

----------------
'01 3500 4x4 ETH/DEE Sport
'83 CJ7 383 stroker 4" lift and other stuff
'74 Norton 850 comando
'77 FJ40 myers snow plow

[This message has been edited by willyslover (edited 02-08-2001). ]

 

[Mick2500]

Hey Mike,

Thanks for all the hours you've dedicated to the TDR!
Good luck on the new venture.

Mick2500
(yes, 4 wheel discs and ABS are still better) #ad

 

[Briar Hopper]

Sorry to see ya go, Mike, thanks for the great job you've done.
Let us know the name and address of your shop when you can, so we can give you our business.

------------------
Tom M.
Secretary of the Great Lakes Turbo Diesel Registry GLTDR B. A. D. Boys www.lubedealers.com/meers.html

 

[Whitmore]

Thanks for all your hard work and dedication to this site Mike,you helped bring us this far and its time for someone else to maintain what we got,good luck on your new venture,if you get time come chatt with us again #ad
#ad
#ad

 

[RKohn]

Thanks Mike.

Good Luck.

------------------
Y2K Red Stealth Sport 2500 4X4 QC SLT+, 5-spd, 3. 54 anti-spin, 265-75-16 LTX’s (There ain’t no such thing as options, cause ya gotta have it all, including: DC’s dead cow/vinyl interior and don’t stop anti-lock brakes. ) Stock, but not for long. Oops, too late. What silencer ring? (More fun than my 98 SST)

 

[Papa Joe]

Thank you... ... ... ... ... ... ... ... ... ... ... . #ad

 

[Bigsaint]

Mike, best of luck with the new shop and thanks again for answering all of my ETH questions.

Scott W.

 

[Big-D]

Mike,

You have done an awesome job. Best of luck in all you do Buddy! Dave

 

[Archive]

Thanks for everything Mike.....

Please let us know the name of your business and website or phone number. When it comes time for me to buy my lift hopfully I can buy through you?

Speaking of that..... Can you get Parnelli Jones Dirt Grips yet??? I want 33x12. 50x16 I know they will be making them I just can not find them anywhere yet. SO if you can get them email me ASAP please!

 

[Bumble]

Thanks and good luck!

------------------
2001, 3500, 5sp, 3. 54LS, 4x4, pyro and boost on the A-pillar, 165 watt backup lights, Thomas powered on-board air system, Grovers.

 

[Expat]

Tango Yankee!

And good luck with the shop! I'm sure if you have any focus at all on Rams, you'll find that you have a lot of credibility (and customers from this forum.

 

[Steve St.Laurent]

Thanks for all your time and effort helping out with the forums Mike! Good luck on your new venture - sounds like a lot of fun to me. Katdiesel (Eric Howard) will be taking over as the 24v engine moderator. Thanks for volunteering Kat! Now be nice to him guys #ad
!

-Steve St. Laurent
Lead Moderator

 

[Pete Peterson]

Be nice to him!?! Steve are you nuts???? He is the main trouble maker #ad
#ad
#ad
Anyway congrats. Kat and have fun!!! Pete

 

[Cliffman]

Good luck in your new endeavor Mike. Thanks for taking the time to help make this website such a huge success.

------------------
2001 Driftwood 3500 Quad Cab 4x4, Long Bed, 5. 9L HO Cummins Diesel (ETH), 6-Speed HD Manual (DEE) Loven the shift thing (Arrrrrh), 3:54, SLT+, 3. 54 Anti-Spin Axle, Camper Special Group, Trailer Tow Group, 18,000 LB 5th Wheel Hitch, Leather, Sliding Rear Window, BDs E-Brake, Rhino Liner (gray), Velvet ride shackles, cup smoothy, Power Edge box / EZ Box w/elbo, DD Stage III injectors, McLeod Dual Disk Clutch, K&N, SPA Gauges, Jardine Exhaust, 16cm turbo housing. Love the smell of diesel in the morning. Hope your watchen DC cuz every thing you see here is a big lie, Hehe.

 

[EFielding]

Hey Mike,
Best of luck on the new venture. Thanks for all you've done.

------------------
'99 Ram 2500 QC 4x4 Shortbed SLT A/T K&N, Westech pyro/boost, Line-X bed liner, Rancho 9000 shocks, Midland CB,285/75. 16's w/Abbott ERA, JRE 4" exhaust & JRE Stage I injectors