Timing help

[sgriffing]

PDR "C" wrench got to the bottom one no problem.

Any tips on getting to the top bolt?



Take the Fuel line off right?



Any tips on getting the fuel line off the pump?

That sucker is good and stuck.





POD's are in and the HX-40 is on with 4" pipe "Straight" to the back. Taking it north tomorrow. I'll post results when I get to NY.



Later,

Stevie G.

 

[jbolt]

Stevie- I have the same problem with the fuel line. I tried to take it off and the fitting below turned. Scared the snot out of me, thiught I had broken something on the pump! I could not get the line fitting to budge and thought I'd better stop before I really did screw something up.



Some of the others are heating and bending the wrench slightly. I ground the side down to remove the rounded edge and at a slight angle. Works fine now.



Jay

 

[Tim1]

bent wrench

The top bolt can be teached with a bent wrench. It has a offset to get behind the fuel line. There is a picture in this forum, you will have to do a search. I used 5 wrenchs of different brands to slowly loosen and tighten mine up. Tim

 

[formula]

You mean like the pics I posted of mine?



here's the thread : https://www.turbodieselregister.com/forums/showthread.php?threadid=60101



#ad




#ad

 

[sgriffing]

Thanks guys.

I'll give it a try when I get to NY.