2nd Gen Non-Engine/Transmission Tire height

[nfox]

How much would i need to lift my truck to run a set off 315-70-16 tires with 9. 5 wide rims, the tires measure 34. 50 tall. Any help would be appreciated!!Oo.

 

[csutton7]

I'd go with a 4-5" lift--some guys will say you can get by with the 2" leveliang kit, but I bet you will rub---chris

 

[mediccummin]

You can go with D25 springs that give you about 2. 5-3" , +1/2 links, adjustable trac bar. That will give you enough clearance to run 315's and the wheel you describe without any rubbing problems. Without the longer links and trac bar you will have all kinds of problems with rubbing, like mentioned above. I run this set up I've mentioned and have no link or wheel rubbing at all, not even 4x4ing. Just a note also I tried to put the 35's on with the just the 2"blocks to see how they would fit, and they would not turn at all. Make sure you have the proper offset also on your wheels, I would'nt go less than 4. 5" or you will run into some problems. Also each truck is a little different. Good luck.



Who makes the 315/70/16 I dont think you can get that size in BFG.

 

[nfox]

Tire Size

Goodyear Wrangler makes that size and there are some other tires also.

 

[Dane]

Be aware what does not rub on the street will often rub badly off road. I just depends on how you use your truck.



I think 4-5" will be necessary for 315s

 

[nfox]

Tires

Anybody running Goodyear wrangler mt/r tires? How do they wear and how is the road noise?