Here I am

Tire size differences for hauling

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

What happened to the site sponsers list

06 no-drill 5 wheel hitch

my bad, it is a 6-lug hub on torflex type axle. the problem has been finding a tire that stays under 30" with 3000lb capacity. the 225-75-15 is ~29. 5 according to several mfg specs. so far 215-85-16 or a 215-75-17. 5 are closest. good thing this came up or i may never have stopped looking for 5-lug wheels!

problem number two is that it is a company truck and it may take FOREVER for the motor vehicle folks to authorize a change. only took 2 trannies and 3 torque converters on the last F350 Power-joke to get them to come around... :rolleyes:
 
BEAST2B >>>>>> For heavy haulin' the 15" tires are not at their best. For 6 lug six hole 16" see etrailerparts.com for trailer wheels. Great bunch to deal with... ..... JIM
 
i want to know for those that changed to a G from a E tire. Did you change the rims as the E rims are not rated for the pressure of the G tires? :D
 
I don't want to steal the thread but at SouthwestWheel.com every wheel has a rating and the question still is does the dodge oem wheel rate for a G load ? :confused: :confused:
 
I have never been able to figure this out. I just got a brand newset of wheels and there is absolutely nothing stamped on them.



I have some wheels that have the size stamped on them along with "JJ". Some people have said that "JJ" means 80 psi but I do not think this is correct.



I quite sure that "JJ" has something to do with the tire profile or bead profile or something like that but not the load rating.
 
Jj

PatrickCampbell said:
I have never been able to figure this out. I just got a brand newset of wheels and there is absolutely nothing stamped on them.



I have some wheels that have the size stamped on them along with "JJ". Some people have said that "JJ" means 80 psi but I do not think this is correct.



I quite sure that "JJ" has something to do with the tire profile or bead profile or something like that but not the load rating.



Example:... You'll notice it reads "6J x 14 H2 ET45". The "6J x 14" part of that is the size of the wheel rim - in this case it has a depth of 6 inches and a diameter of 14 inches (see the section directly below here on wheel sizes for a more in-depth explanation). The "J" symbolises the shape of the tyre bead profile. (More on that later)



Only has to do with the rim shape/conture...
 
Back
Top