Tire Sizes

[roachcoach]

You can fit 35's with no lift, it has been done on stock wheels, if you have aftermarket wheels they may have a weird offset and rub more than a stock wheel would. . I believe you could fit 37's, but that would require quit a bit of fender trimmin'. I like the look of a big tire with no lift.

 

[HHhuntitall]

I had 35's on my '91, but they rubbed pretty good. I had to trim the front of the fenders or they wouldn't turn. The springs were settle pretty bad on it at the time, though.

 

[ZedMikey]

My truck is off getting fender mods now. When I get it back, I should have no rubbing with 42s and 5" of lift!

 

[roachcoach]

Sweet man, post pictures of that.

 

[ZedMikey]

I will post pics soon. The fender mods are done... still needs bodywork to make them look nice, though. The mods are basically the same as Metcalf did on his Dodge.

Project: Doitall Dodge - Page 14

It's at the alignment shop right now; I should have it back this evening.

 

[ENafziger]

Wow... all this talk has me wanting to cut the fenders and put some 38 x 15 Toyos on my '91. 5!

--Eric

 

[ZedMikey]

Wow... all this talk has me wanting to cut the fenders and put some 38 x 15 Toyos on my '91. 5!

--Eric

My truck is back home now; I'll try to snap some pics of my fenders soon. I've been too busy with work and school to get out there with a camera.

I've got some vicious death wobble going on now, so I'll be out there working on it again soon.

 

[Simplysmn]

The truck as it sits NOW! by simplysmn this is 39's with 11inches of total lift next crew is only getting 37's

 

[ZedMikey]

The truck as it sits NOW! by simplysmn this is 39's with 11inches of total lift next crew is only getting 37's

Denied by the firewall!

 

[Simplysmn]

send me a e mail I will foward it to you

 

[ZedMikey]

The truck as it sits NOW! by simplysmn this is 39's with 11inches of total lift next crew is only getting 37's

That's a big truck! Crew cab, 11" of lift!

 

[Simplysmn]

Yeah I Kinda went wild with it after I rolled it on the rebuild I went even higher then it was when I started with it had 8 in front spring's dual shock's and dual stablizer's on front what also made it look big was I used a DRW bed and cut the fender's flush with the bed so the opening was Hugh Straight piped Man that was a Sweet truck . but sense I sold it I am building a replacement but this time it's getting refinement's like Power window's ,Lock,s, and Mirror's ladder bar's It will be done this Summer as long as I can get past health issues's

 

[ZedMikey]

Here's some pics of the fender mods...

#ad


#ad


#ad

 

[ENafziger]

I like it!!! Are those 40s? How much spring lift do you have?

--Eric

 

[ZedMikey]

Those are 42s with about 5" of lift and the axle moved forward 1".