Alan Reagan
TDR MEMBER
At 2000 miles, I noticed that my right front tire was getting a slight ridged wear on the outside. I took it to the dealer and of course it was within spec. So, as I have done with each of my vehicles, I took it to the alignment shop I have always used. The total toe in was out .8 degrees. That's about 3/8 of an inch. Now the truck tracks good, doesn't wander and no longer drifts off to the right. If you are getting a new truck, watch for that. The shop I use still has the non-computer alignment system and it has always been dead on. I will rotate the tires this weekend to make sure all is well and get the front tires to the rear to smooth out the tread.