torque specs for front rotor nuts

[goodguys75]

doing a front break job on my 2006 3500 what is the torque specs for the main nut that holds the rotor and the other 8 that hold the rotor in place... thanks so much for any info

 

[goodguys75]

???? anyone... thanks

 

[cerberusiam]

If you mean the axle nut, don't think that has to come off. The extension bolts on the fornt hub refernece 96 ft\lbs on installation.

 

[goodguys75]

great thanks for the info... ... have not looked at it yet, so i thought the axle nut had too also come off... . never removed the rotors yet

 

[cerberusiam]

Assuming this is a DRW, unbolt the extension and remove it. Remove the caliper. Remove the caliper support and I think the rotor just pops off, may take a little persuasion.

The rears are a little different because the rotors bolt in from the back side so you have to pull the hub. Don't think the fornts are like that thouhg but all I have is an SRW and they don't bolt on.