2nd Gen Non-Engine/Transmission traction masters on my DANA80?

[jbrowne]

Has anyone installed traction masters on their rig? I am getting a bucking when pulling and have just about run out of things to do to stop it. I suspect that the differential is torquing causing the bucking I have experienced. Done the throttle springs, timed and balanced the drive shafts, tightened all bolts on springs etc. NOW WHAT. HELP>

Jim

 

[HEMI®Dart]

Can you post a link or picture of Traction Masters?

 

[jbrowne]

No i can't but if you can immagine a side view of the differential and frame, the traction master is attached to the underside of the axle where the shock in mounted. Then a metal square tube (thick walled) projects forward about 40 inches and alignes with the frame. A urithane bumper is mounted on top so as to bump against the underside of the frame. Thereby preventing the differential torque when power is applied. The usual application is found in racing cars and off roar vehicles.

Jim

 

[Bob4x4]

You might want to contact Bob Conner to ask about his roadmaster active suspension. Ph#877-543-7563. I have had them on my truck for a couple of years with good results



Bob,in Riverside

 

[jbrowne]

Thanks, I'll give him a call Monday.