trade my drw for srw???

[gjacobs]

I have a '03 4x4 dual rear wheel and would like to trade front and rear axels and bed from a 3500 single 4x4. Anybody interested give me a call.

Thanks

-color is black and has 3:73's

 

[CumminsBu]

What color is your truck, and what gears do you have?

 

[gjacobs]

color is black and the gears are 3:73. I just read a post where all you need is to swap the spacers out with a srw on the front and swap out the rear end and bed.

 

[CumminsBu]

Long or short bed? I have a black 2500 truck and 4. 10 gears.

 

[FDavid]

Originally posted by gjacobs

color is black and the gears are 3:73. I just read a post where all you need is to swap the spacers out with a srw on the front and swap out the rear end and bed.

Actually all you have to do is remove the front spacers (8 bolts). And your rear end is fine, its just an inch or 2 wider than the fronts, you can hardly tell. The bed is held down by 8 bolts as well and it will take 3-4 guys to carry it. If you are really planning on doing it and need more detailed info just send me a message.

Dave

 

[CumminsBu]

Is there any other differences in the axles of a DRW and SRW? Like inter axles shaft diameter and bearings sizes? I can tell the differences in axles width.

 

[gjacobs]

mine is long bed

Is the bed cut up higher on the dually? Why could the fenders not be taken off and the clip holes filled and painted?

 

[FDavid]

because there is actual sheetmetal cutout as well. Quoted more to fix the dually bed than to buy a new one. You can also sell your dually bed which in my case paid for the new bed and than some.



#ad