Trans Dilemma

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

lowering back end of truck

Why not to go with smaller than 16cm housings

Status
Not open for further replies.
I'm not sure what to do. My getrag is really screaming in 4th(even with an extra qt. ) Should I just wait till it lets go? Or should I rebuild it this summer, after we get through with Transmissions this semester?It shouldn't take long or be real hard after working with Eaton-Fullers and such. I'm not exactly sure how much it cost to rebuild it, but I know it'll be a few hundred dollars at least. Any suggestions?





Thanks, Steve
 
Steve, Bill Kondolay will give free advice 1 866 504 4002 or even go to Pastor Bob.



There are options to get you going. HTH
 
If I had the money, the Nv4500 would be going in there for sure. But since I have to buy tools and books and such for school, it won't be happening anytime soon.





Thanks, Steve
 
Steve,



I'd recommend you do a rebuild at a time that's best for you. If you do a rebuild sooner it may be cheaper, but if you're like me, you'll drive it until you think it's about to die and then fix it. If you have the knowledge and resources available, you should be able to do the repair yourself for about $400 less than having someone else do it.





Dustin
 
Status
Not open for further replies.
Back
Top