Engine/Transmission (1998.5 - 2002) trans fluid

[HTRDHLR]

I am installing a DTT valve body. Stephan told me I only need about five qts of fluid. is is ok to replace those five qts with amsoil synthetic? hat seems to only be about 1/4 of the capacity?

 

[MoparDave]

More like 10 qts, stick with the +3 until you are sure the VB is dialed-in.

 

[HTRDHLR]

I have no problem with that but why wont it be "dialed in" right from them?

 

[KatDiesel]

Each truck is different, and will react differently. For the most part you can slap it in and go... but you may have to do some fine tuning.

 

[HTRDHLR]

What about mixing +3 with +4?? They (mopar) says +4 but dtt says+3

 

[K_Arts]

From my experience, I would stick with the ATF+3. I ran the Amsoil +4 for a little over a year and felt it was almost too slick. I followed what DTT said and put in ATF+3 and by does my transmission feel better when it shifts. Don't forget too that ATF+3 is about 1/4 of the price as the Amsoil stuff. Yes the Amsoil fluid is top quality, but as Katdiesel said, every truck will run different.



Kev