Here I am

transfer case change a/t to stk

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Effects of Governor spring upgrade? Shift point adjustments?

Help! This Thing Showed Up In My Oil!

Status
Not open for further replies.
i plan to swap to a lower mile transfer case



mine in trk is a 5 spd t case ( hooked to a 5 spd)



the one i have is from a automatic transmission 1993

same year



any splines , parts that r different??



ifs it not a problem ill check my old t case and keeep it for a spare



thanks in advance ,



bill
 
The input shafts are bigger on the manual I know that for a fact. The case may also have different imput shaft bearings as some 205's came with the larger front bearing and some did not. I haven't been able to find out what the difference was.



As for rebuild parts all 205's are mostly the same except for the inputs and outputs changed with manufacturer and with appliacation.



What is wrong with your 205 now??? I have rebuilt several and most were due to not enough lube or leaky seals. They are one stout unit.
 
leaky seals

i have a spare 205 from a/t trans mine is a 5 spd nv4500



in a 1st gen , only has leaky seals



and 965 foot pounds of tork.





i guess its may better to sell or trade





can i get seals at dealer?



bill
 
Status
Not open for further replies.
Back
Top