Here I am

Engine/Transmission (1994 - 1998) Transfer case plug question

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1994 - 1998) slave cylinder

Engine/Transmission (1994 - 1998) A quick injector/DV question

Status
Not open for further replies.
I have a very slight leak at the back of the transfer case where the drive shaft exits. I want to check the fluid level but I don't have the correct size Torx bit. Does anyone know the correct size? Is it a dealer only tool?



Thanks,

Aaron
 
My Dad has a '97 2500 V8 with allen head drain and fill plugs but mine has Torx head plugs. Just for fun, I tried the allen head sockets I have and none of them will fit.
 
Yep. I don't know about the heavy duty version of the transfer case, but that's the way it is on mine. It's probably some metric size, but that socket works.
 
I just wraped the jaws of the curved jaw vise grips around the outside perimeter of the plug, clamped it real good and heaved. It came out and there are a few nicks around the outside of the plug, who cares, I don't.
 
Thanks for all the replies. I did not change the fluid but I did check to see if the above tricks would work and both do.
 
Status
Not open for further replies.
Back
Top