Attention: TDR Forum Junkies I've got a 94 12 Valve after a trip this past weekend and almost loosing the transmission due to that great plastic clip design I change over to hydrolic hoses from the cooler to the trans lines. In that process I must hace dispurbed the cooler jusr enough at the end where the hoses attach to provide myself with a nice leak. It was right between what I thought was a brace for the two lines but to find out after cutting it its some kind of bypass from one to the other... What the sam hell is that for? I was able to extend the hoses and with just enough room as its in such a fine place to work reattach the after cutting the pipes back. . Is this bypass needed and does it searve any real purpose???
It seems to run down the raod alright and even shifter a little better into lock-up and overdrive. . Is it going to do any harm not to have that silly little bypass pipe in there??
Joe.
It seems to run down the raod alright and even shifter a little better into lock-up and overdrive. . Is it going to do any harm not to have that silly little bypass pipe in there??
Joe.
