Here I am

transmission cooler size???

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Front U-Joint part number???

Brake/Rotor Heat Question

Status
Not open for further replies.
I am considering putting a larger transmission cooler on my 95 auto and was wondering about the size difference in the lines? The new cooler has 3/8 inch lines and the old one has larger lines (not sure what size). Will the new one cause a restriction problem. I am going to switch to synthetic fluid at the same time i change the cooler and later when greenbacks are more available i am going to deeper pan on transmission. I am more worried about restricting the transmission fluid and causing a pressure problem. Any help would be appreciated, thanks.
 
cooler size

I would recommend looking into using an engine oil cooler for a replacement as many of them use 1/2" lines and you would not have to worry about restriction. Fit as large a one as will fit in the area. Good Luck. Let me know if I can answer anything else.



James
 
Status
Not open for further replies.
Back
Top