Engine/Transmission (1998.5 - 2002) Trip to TST Corp.

[pro99]

Well I went to Tenn. to see an old friend and on the way down the truck started running funny. I turned the pm3 off and still had a miss. I parked the truck when I got there and waited a few days to replace the injectors. I put the injectors in and still had the concern. When I was on my way back I went to see TST to see if they could help. Mark gave me the tour of the place and it's a nice place. He checked for codes and found p0252 and p0253. Cleared codes and it did not come back. We checked the box and tested fine. I had to leave because I was on a time thing to get back. I pulled the truck into work and unplugged the EDGE EZ from the map sensor and found old Mr. green :{ I used the new wire connector that TST gave me on the pump wire and soldered the ground wire at the pump harness. I plugged the pm3 into the map sensor cleared all codes (with edge EZ unplugged) and drove home with no concerns. I plugged the EZ back up and boy did it start all over again. What to do now? The box is about 2 years old not even 2 years but what can I do about it? I want to say thanks to everyone at TST for your help!!



Thanks Chaz

 

[Partyat33]

TST is definetely a class vendor.

 

[Graphic man]

Chaz, send the EZ back and have Edge test it, sounds like it could be the problem!





Scott