Here I am

Archived Truck Made and Knock and wont crank

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Archived Won't start...WHY!!!

Archived borgeson shaft

Status
Not open for further replies.
Showin my a&& off makin a little smoke with the tires that my buddies talked me into. I was spinning through 1st, 2nd, and 3rd, and then as I eased it into 4th, the truck made a knock and cut off. I tried to crank it with the key, then dump the clutch and start it. Called my buddies and they pulled me back to the house. Now the truck wont crank and we cant figure out what it is. I hate to even ask this but is my injection pump shot? If not I need help quick.



oh yeah PM3 was wide-open
 
It will turn over and crank, but it will not start. The truck made a loud pop and it was as if the key got turned off and it cut off. Is there any way to check the injection pump to see if thats the culprit or not?
 
There is a thread...

on the 24V engine and drivetrain that talks about testing a VP44 and ways to do it. Titled something like "Testing VP44"... I don't remember specifically. Good luck:D
 
Status
Not open for further replies.
Back
Top