Truck stalling

[J Allan]

Help Question. For the passed week my truck stalls mostly in the morning. I live in FL. Morning Temp. 55 to 65. I start the truck let it run for 2 to 5 min put it in gear and she dies. Start it up again and she fine same steps every morning. has anyone had this problem or know how to fix it.

------------------
Jeff Allan
31D 81199
2000, 3500,4x4, 355 gears Laramie SLT, BD valve Body, BD Torgue Convertor, BD pressureLoc,#14cm wastgate turbo housing, powermax 3 adjustable, stage 3 injectors, custom dual 3" exhaust with dual 4" barrel tubes behind rear tires. Trailmaster SSV shocks, ISSPRO Turbo boost, EGT gauges in piler, K&N air filter, bushwacker fender flares, black nerf bars, hellwig spring helpers, Let the BOMBing begin

 

[Guest00]

#ad

 

[Ladders]

Being auto disabled, do you warm up in N as park wont flow fluid (other posts I've read). Could be the fluid in the trans OR the 'puter when going into gear. Does it happen in a P to R or a P to D shift? post some more and maybe other auto "enabled" owners will have a better idea.

\\BF//

------------------
"Drifty" y2k SLT L. E. 2500QC/SWB/5sp/3. 54LSD/bed spray/camper/tow/Mag-Hytec/Ball valve oil drain/25. 5k 5th hitch/muffler&resonator STOLEN?/Nerf bars/E-Brake/etc. 42k+ in 16 months!
Not Stroking, BUT, RAMming it Home! SOTSU!! aka \\BF//

 

[J Allan]

Thank you for your reply. I'm new to TDR.
Mostly when I start my truck, I'm shifting from Park to Drive. I will try going from N to D. it is strange she starts with no problem and when I drop it into drive it shudders and stalls. Start it again and off she is running no more problems until she sits for a long time. It is a problem I have not read about and I thought just my luck to have a one truck problem not easy to figure out. 1st diesel and 1st new truck

Thank you
Jeff

 

[Waterpete]

Contact Piers at BD. This is a known problem with the pressure lok and all he has to do is add one little item to solve your problem. I had the same problem.

 

[Guest00]

sounds like the tc clutch is locked up in first when it is put in gear.

 

[J Allan]

Thanks guys, I will check into all of it. boy am I glad I join TDR it Is saving me a lot of frustation. #ad

 

[simurdak]

I have the exact problem that you describe. I have a pressure loc but did not have this stalling problem until the dealer changed my Map sensor. You can bet that I'll be calling BD in the morning. Thanks for the info.

------------------
2001. 5 2500 SLT, QC, Auto, 3. 54 Anti Spin, Towing Pkgs, Fogs, VA CPC, Pillar Mounted Ispro Pyro, Boost & Trans. Temp. Gages, Pac Brake, BD Autoloc, BD Pressireloc, Cobra CB, DeeZee Running Boards & Bed Caps, Reese 5TH Wheel Hitch, Tekonsha Brake Controler, Pulling a 30ft Montana 5TH Wheel.