Here I am

TST out of stock

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

just had the genos EZ drain plug twist off in my pan !

Twins cold piping-- why steel? Why not copper or PVC?

from 3/3 the manners are very nice. 4/4 and up just come on slightly harder but in my opinion its still awesome! keeping the second nuber down ( the torque #) it can be less agressive.
 
Originally posted by mattymac

from 3/3 the manners are very nice. 4/4 and up just come on slightly harder but in my opinion its still awesome! keeping the second nuber down ( the torque #) it can be less agressive.

I agree with this toatally. It's great up to 3 but above that it get's a little touchy for towing. Normal driving I usually run 4 but 5 isn't bad either. Anything above that is too hot for me.



-Scott
 
I installed mine and have driven it for four days. No codes, all is well. I love it. Setting 1/1-definite improvement over stock. 2/2-Quite a bit more than stock. I lusted for 3/3. It was even better! I have run 4/4, but generally run 3/3, which is more than enough. You can play with the settings, but for me, I like it with equal power and torq numbers. I haven't towed yet, but on 3/3 I don't think I'll have a problem, judging by the current temps. Do it. You'll love it!



P. S. When I keep my foot out of it, the milage increases a little as well. Haven't checked it yet. Just going "by feel. "
 
Back
Top