TST PMAX3+ Edge Comp

[Big P]

Is it possible to run this combo? Using the Comp for timing only you could turn off timing for towing while using the fueling from the TST. And you could also adjust timing on the fly. Obviously you would leave the pump wire from the Comp off, but which would you use for the MAP sensor location?

 

[KLockliear]

Basically you would be using the EZ features of the Comp.

 

[Big P]

Right, but how would the hook-up work.

 

[jwilliams3]

Install TST PM3 box harness connection into map sensor, then the edge connection.

Use the fuel pump wire from the TST box.

Use the data-link connection from the Edge box.



This should work!

Be careful.



--Justin

 

[JSHAW]

I've stacked the EZ, the power puck and the VA with my TST comp and the VA works the best by far.



Jim Shaw

 

[Jeff Clark]

I did the same thing. Ran the TST PM with the Van Aaken. Worked good.

 

[KLockliear]

Connect everything EXCEPT the pump wire (grey wire).