Engine/Transmission (1998.5 - 2002) TST PowerMax question

[Texas Diesel]

I found (under the carpet) where the previous owner had stuffed his PowerMax module. He unhooked the pump wire and MAP conntection and zip tied them out of sight in the engine compartment.



I have the PowerMax module with three LED's: On, Fuel, Boost. A switch is next to the Led's. The wiring harness has a MAP connection (2), red/black (power?) and a single wire that goes to the VP-44 (?)



Is this a complete setup? Is it Christmas in May?



Any idea how to test it?

 

[Todd T]

yep, you just loop the map sensor through the supplied harness and hook the pump wire up. you'll need a good ground and 12V Power. you can download the directions from www.TSTproducts.com



hey and for another $99 bucks you can get the remote to adjust the levels on the fly. it doesnt have a rj45 (like a telephone jack) cable pluged in the back of it does it?

 

[Texas Diesel]

Yes it has the RJ-45 connector in the back.



Looks pretty neat from the website.



I've emailed them to see if I can send it in to be tested.



Thanks!