turbine housing question?

[BPonci]

Has anybody tried a 64. 70 or a 66. 70 and compared it to the . 80 housings as a single? All i see is everybody useing the . 80 housing. My thought was to use a . 70 housing and mod the gate to flow more out during the w/g cycle. Or maybe even trying a external gate. TIA.

 

[BPonci]

20+ views with no response. Beuler, Beuler, Beuler

 

[thekidfan]

20+ views with no response. Beuler, Beuler, Beuler

You know your the leader of the pack, try it and answer your own question will ya... ... ... ... ... ..... we're waiting for you

 

[Forrest Nearing]

propensity to surge would definately be amplified, but you've got the breathing mods, so it might work out alright...



edit: I thought you had a ported head and a cam... without one or both of those, I wouldn't put the small housing on a 66

 

[BPonci]

I should change my sig. My old my how things change. Its pretty close to stock. Long story that most would not believe.

 

[Forrest Nearing]

I wouldn't do it... you're basicly moving your surge line to the right... the 66 is already trying to move more air than your engine can injest w/ even an sps hot side... with a smaller turbine wheel and even smaller housing, it's going to be trying even harder to move air at RPM where your engine simply can't accept it

 

[Jim Fulmer]

I should change my sig. My old my how things change. Its pretty close to stock. Long story that most would not believe.

You want to bet on that!



Jim

 

[thekidfan]

You want to bet on that!



Jim

What are you joinin' the club :{

 

[RonA]

I paid to not join that club. (I hope)