Engine/Transmission (1998.5 - 2002) Turbo advice?

[jrandol]

I am going to be adding stage 4 injectors permanetly possibly this weekend if all goes well. What size turbo will work best for my added HP? I plan on adding an EZ box in the future piggy backed to my FMS box.



What Holset turbo compares to the KSB1 Turbo? Hx40? HX50?



I would like to be able to use as much power that will be made in my truck for everyday use. Dont really care about becoming the dyno or 1/4 mile queen

 

[A2Z DIESEL]

B-1 BOMBER

THE THREE FASTEST TRUCKS IN THERE CLASSES AT BANDIMERE ALL HAD B-1 SO CALL ME @A-2-Z DIESEL AND I WILL GET YOU IN TOUCH WITH THE CREATOR 480-288-0177

 

[rweis]

I have a KSB1B on mine see sig and LOVE it! I powered up to do RV'ing and also do not care about racing or even high acceleration unless it is in traffic to get the HELL out of the way.



It spools smoothly with the Comp (1x1) acting as an EZ. On 1x1 I don't add fuel till 15 # I think. The KSB1B is really spooled up and rolling above about 8# or so. From a standing start by the time I get to about 30 mph or so she is READY to roll.



I put my foot in it about 40 mph one day to see what happens and she shot to 80 before you could get back inside the gauges to do a cross check.



When I pull 8k 5er the sig I have is so smooth it is FUN to drive. Power response pulling is outstanding. The KSB1B is around 8# or so min and ready to roll. Temps are all under 1k* LOTS of air!



I couldn't be happier with my combination.



Bob Weis