Competition turbo oil line thread size?

[Blacksdieselhp]

I was wandering if anyone could tell me the thread size of the oil feed line inlet on the hx-35 hx -40 and HT3B? Also the thread size of the filter head port(besides the 1/8" npt plug). Thanks for your help.

 

[DRAG DIESEL]

-6 on the ht3b

 

[Proram]

Thread size

Port on top of filter. 12mm x1. 50 if your useing an it's a -6 to 12 mm x1. 50 use an o-ring in place of the washer. (it'll seat in the chamfer better) the oil feed on a 35 and 40 is the same fitting to.

use and o-ring on that fitting too. Earls # is 991944



Scott

 

[Blacksdieselhp]

thanks for the help