Turbo questions, about ordering a Dodgezilla?

[McDowra]

Originally posted by Shortshift

What is the max HP this turbo would work well at? Practical HP range?

we recommend the Dodgezilla turbo up to 450hp.

 

[BIG BOB]

Originally posted by McDowra

we recommend the Dodgezilla turbo up to 450hp.

McDowra,



What is the CFM on the Dodgezilla? compared to a HX40 and HX35?

 

[PRout]

Originally posted by McDowra

we recommend the Dodgezilla turbo up to 450hp.

Thanks for the reply.



Have been considering either the DZ or the Jammer. The average driver might get more benefits from the quicker spool up of the DZ, vs the higher top end flow of the Jammer. That is unless you race, or tow alot, then the higher airflow would be more useful.



For me, with all the stop & go here in the city, the DZ sounds pretty good. Also, would not have to upgrade to a 4" exhaust brake. Pls correct me if im wrong. .

 

[Bob Wagner]

exhaust brake is fine with the dodgezilla, you can use the same exhaust adaptor off the hx35 and hy35.



The dodgezilla ia also stocked on the west coast

 

[DProehl]

McDowra Are your DZ compressor housings and wheels available to those that can machine there own center housings?

 

[McDowra]

Originally posted by DProehl

McDowra Are your DZ compressor housings and wheels available to those that can machine there own center housings?

Not at the moment, I can't get enough to supply orders for turbos so I don't have any left to sell . I could sell you one of the smaller(60mm) wheels and compressor housings probably. I would have to check but they are usually easy to get.

 

[Bob Wagner]

just installed another one this afternoon



#ad




12v with Mach2 EDM's

 

[Vaughn MacKenzie]

Originally posted by McDowra

Just to clarify, compressor housings are like exhaust housings extrnally they may be the same but internally they are different. The Dodgezilla uses the highest flowing compressor housing and compressor wheel combination. I have 23 on order, built ready to go waiting on that one special compressor housing. I could put a different part number housing on them and ship but it wouldn't be the highest flowing combination. Good things come to those who wait.







Would you check that please? Looking on web I find them to be within 35. 00 of each other.









It may help if you think of it as a HX40 with a 35 shaft.



Its nothing like the 04. 5's turbo





sorta bouncing around on this post.



thanks



Tim

Hi Tim, I could be wrong about the pricing of the PDR-35 turbos but last I knew they were complete with a 12cm wastegated housing @ $650. I know they were going for that when I bought one a couple years ago. Of course the 14cm wastegated was quite a bit more. So that's what I was comparing to and came up with the ~$400 difference. Comparing 14cm wastegated turbos would be much less off a difference.



Vaughn