Engine/Transmission (1994 - 1998) Twin questions

[JHastings]

So If I use 3" schedule 40, what radius bends have you guys been using for you hotpipe?

 

[JHastings]

OK,

I got it all together and it can go on the truck here whenever I get my truck dynoed as it is with my single. My last couple of questions are do I have to make a mount for my 3B or can I just hang it off the hotpipe? It is a sturdy pipe with schedule 40 and 3/4" flanges on both ends. Also are there any part numbers for a 3B oil drain? Otherwise I am just going to have to make one.

Thanks,

Jamie

 

[Forrest Nearing]

you should be fine just hanging it from the manifold, but I'd still make a little brace/bracket up from the motor mount or the bellhousing. doesn't have to be substantial, just something

 

[RyanB]

Just curious if anyone has the thread size fittings for the oil lines for both the stock hx35 and the HT3B. I have heard that there are possibly two different sizes for the HT3B but not sure. I am going with AN fittings if that makes any difference and need the adapters to go right into the housing.



Thanks in advance... Ryan