twins???

[DSpivey]

i have a 93 gen1 with pods. pdr x35 turbo. smokey joe fuel pin. 4 inch exzaust.

the pump has been turned up some . and a full suncoast transmission. im wanting to upgrade to a twin set. up i dont pull a whole lot i have a duallie for that i just want to have more acceleration and more top end power. what would be the ideal setup for this and what do i have to do to the head so it can handle the twins . anything else i should do to the pump or anything when i get the twins. or would it be better just to get a big single. or would that hurt my low end. would i still need head work with a single.



thanks guys

 

[CSchafer]

what kind of boost and egt's are you runnin now?

 

[DSpivey]

38 on the boost an the egts will get up to 700 900 if i stay in it for a while

 

[dpuckett]

Is that pre or post turbo? If pre turbo, you definitely dont need twins- your EGts are ok. If it's post, the probe needs to paddle upstream to the manifold; it's useless in the pipe. If you break off the tip of your probe, you have bigger issues than a tip that took out a turbo. Grease is a wonderful substance to put on the drill bit and tap when tapping to get your hole threaded.



Daniel