Ultimate Fueling Module

[Stroke This 24V]

Is anyone using a DD Ultimate fueling module that can tell me what to excpect? I am in the process of getting DD3's Will I need to get the boost module too? Or is the Fueling module all I need?





If I am going about this the wrong way can someone steer me in the right direction. I have got a 5" Exhaust and getting DD3's with DD Ultimate fueling module what else do I need to make all of this cone together?

 

[Sky]

Guages are a must with all those mods.

 

[JohnMcIntyre]

Start with gauges first.....

and benchmark your expectations!!

 

[Devildog]

I have their fueling module, It's awsome it also doubles as a boost module. Your are going to need gauges, 4" exhaust, with heavy fueling you need to get rid of heat "EGT's" that's what the larger exhaust does ( helps keep the EGT's lower ). If you have a auto transmission your going to have to beef it up aslo.

 

[RobG]

You're also going to need a new clutch for your ETH, because your stocker won't last three days before it starts slipping. I'm not sure what to suggest here, but I sure know which one to NOT recommend.



Additionally, an HX-40 wouldn't be a bad idea either because you'll be well beyond the power level that I'm told Pier's turbo works at.



I have the very same setup.



Rob

 

[Stroke This 24V]

I just got in from putting a Spicer ceramic clutch, 5" exhaust, boost, pyro, and fuel pressure in the pillar pod. I had all but the exhaust just not put in so what else should I beware of? I want to be going the safe route instead of finding out that I missed something.



Also do you need anything else besides the ultimate fueling module

 

[Sky]

It depends how much more power you want? Try that fist and go from there!