Here I am

Upstate Dyno Day!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

CT Coffee Nites / Banter Thread 2007 Check For Updates!

Upstate NY '07

Well...

I was going to make this trip but with the recent changes here at home I will not make this at all. I have had to give up my vacation days to try and fix some of the mess created by a disappearing Wife. Hope you all have a good time and maybe I will make the next one... ..... Andy
 
New Meeting Place!

There is a new meeting place, Rt 48 and Lamson Rd. 8 AM. This is the 2nd stoplight from 690. There is a minimarket on the northwest corner, right there! If you are going from the thruway, up 690 (west), which turns into 48, it's on the left, across the corner. This will give us time to BS before we head up to the Dyno.



Don't forget to bring a your drinks and some food item.
 
Busted my dually Sunday night, I probably won't make it. I'll try to get some pictures of my rear to show you:-laf Not that rear Pete, my differential:-laf
 
I want to upgrade and I probably will but I think I'll try to find some used spiders just to get going for now. I've been seriously thinking about making the truck a 3/4 ton so if you guys know anyone with a Dana 80 and a long box that wants to trade let me know.



It was a "truck pull accident":-laf I tried to use "Stupid High Gear" on an extremely tight clay track, I think I ended up last:rolleyes: As soon as the clutch was all the way out it fell on it's face, I made it about 140 feet and the top trucks were at the 240-250 mark. I was able to drive home but it was making noises at every corner and the speedo was floating around so I figured it was the spiders. If I had 215 street tires it probably would have worked for me but the 255 MT's got too much traction and someting had to give. 3rd Low might have saved the day too.



I'll have to see, I might be able to come out but I'm not sure yet.
 
Guys, I was looking over the dyno chart, if I'm looking at this right, I think we figgered wrong. It's not 348, it's 366 hp and 739 torque! :D

Had a blast today! Tim, you shoulda been there!

96 Ford put down 498 hp, smoked worse than mine. But he was the only one... ... . :-laf



Thanks to Dan and Bill for cooking!
 
ok iv got it pete.

D. Fuller-327hp 509tq 2000 f-250 Powerstroke

B. Fuller-229hp 396tq 1996 f-250 Powerstroke

R strickland-269hp 273tq 2005 1500 hemi

DZink-289hp 496tq 2004 2500 Cummins

P. Toombs-366hp 739tq 1992 D-250 Cummins

J. Becker-492hp 770tq 2006 2500 Cummins

S. Ramil-433hp 729tq 2007 2500 Duramax

J. Piscitelli-165hp 266tq 1996 GMC 3500 6. 5

J. Latta-470hp 841tq 2007 2500 Duramax

J. Dashnau-498hp 803tq 1996 F-350 Powerstroke

M. Dicarlo-372hp 679tq 2003 2500 Duramax

C. Taylor-410hp 797tq 2002 2500 Cummins
 
Last edited:
Nice numbers, geez Pete that old bus put down some nice numbers, wish I could've made it but the wife made other plans for me, I had a blast, I got to clean out the basement in preparation for a garage sale:-laf



So Chad what have you got done to your truck now?
 
Guys- I've got the pics/vids transferred over from my camera to a disc. evertything came out great, although some of the vids are 1/4 turned. For some reason some of the shots came out a little dark... ..... ;)



I'll get 'em on asap
 
Tim, i did 360 on #2 the 410 was with water/meth, did get the clutch in and have the same htt upgrade as pete, gonna do 150 nozzles in the very near future. You should give me a call sometime, ill pm my #
 
Back
Top