Valve adjustment on an 04, same as 2nd gen 24V?

[GOT-Torque]

Are the instructions the same for valve adjustment on an 04 engine as compared to a 2nd gen 24 valve? I know the valve lash limits are the same, would the instructions be the same as well? For example, at TDC adjust the following valve clearances (blah blah blah) then rotate 180 degrees and do the rest?



I have a set of instructions that I have used on my 01 and can't find any specific instructions for my 04?



Thanks

 

[nickleinonen]

it is the same. .

 

[GOT-Torque]

thanks, just needed to make sure.

 

[WCounts]

Are the instructions the same for valve adjustment on an 04 engine as compared to a 2nd gen 24 valve? I know the valve lash limits are the same, would the instructions be the same as well? For example, at TDC adjust the following valve clearances (blah blah blah) then rotate 180 degrees and do the rest?



I have a set of instructions that I have used on my 01 and can't find any specific instructions for my 04?



Thanks

I believe it's 360*

 

[ChrisPeterson]

anyway i could get the instructions for the 01?

 

[Tryingit]

I had older instructions. I got confused and spent a lot of time looking for the TDC dowel. On the newer trucks there is a mark (more like a line) on the damper pulley. Everything else seems to be the same. Much quieter after wards.