Valve adjustment

[Jim Fulmer]

Any of you guys run your valves yet? If so what did you set them at..... 010 and . 020.



Jim

 

[Matt400]

Yes, with all the talk about loose injectors and valves out of adjustment I wanted to know for sure that all was good.



I pulled the cover after it set overnight so engine temp was below 140 deg. Checked all the injectors to make sure they were secured then checked the valves.



Intakes have a min/max of . 006" to . 015" and the exhausts min/max values are . 015" to . 030"



If in the tolerance no adjustment is recommended, mine all fell in the middle. Cover Gasket is re-usable.

 

[Jim Fulmer]

Thanks Matt, I'm going to take care of it for a bud!



Jim