Here I am

VDO guages are stealthy...look like original

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Dodge mud flaps great for collecting mud

Powder Coating

Status
Not open for further replies.
I like em... ... I,ve had people think they were stock!!! #ad


Colin
Yea... ... I wish the boost went up to 60 psi. , also.....

------------------
2001 Quad,4x4,AT,4. 10LS,LB,Loaded enough,stock,mostly... . 65 Chevelle sedan, Hella nice driver, 53 Nash Rambler Convt,1 of 653 built,[not a Metro], GM drivetrain, injection, and auto/od
Specialized FSR PRO Stumpjumper,Cannondale F2000, Loaded
MTD Lawn tractor with flames Cummins ISB
12' fishin' boat, loaded. .
 
Almost like these. the difference between the colors is not that far off but I got these before they had that one-piece.
#ad



------------------
2001 QC 2500 4x4 bronze W/two tone Driftwood, 24valve HO 6sp. Blue chip 4-wire box, mag hytec dif. cover, BD stage 1 injectors. Westin side bars, fender flares, Rancho RSX off-road shocks, Spray on bedliner, sweet tooth grill, Leer shell Painted to match with LED marker lights, Bf Goodrich AT Tires. Bed rug inside shell W/aux marine deep cycle batt for lights, etc. M Brolins' CB mount.
Name of rig is "big bronze Brute"

[This message has been edited by EricBu12 (edited 05-23-2001). ]
 
I have had the VDO pyro on order for 3 weeks now!!! Backordered :-( I have the boost and trans temp here but waiting for all of them to be here to install. I got the 3 gauge full A pillar mount from Autometer and epoxyed it onto a $10 used non speaker type A pillar that I roto zipped to allow easy installation of thegauges and access to the light bulbs for replacement in the future. They (DC) are real proud of the factory spray paint. I told the parts guy that I didn't want to paint the whole interior of the truck and he said don't worry, you won't!
OUCH!!

------------------
Flame Red 98. 5 2500 4 X 4. 285/75/16 2"lift in the front to level it out with a 8274 Warn wench. Hiway aluminum 5th wh. tool box. 32'Alfa 5th wheel w/2 slides. 1 pair of black truck nutz under the rear because it's a RAM not a ewe. K&N air filter,soon DDT tc/vb
 
Did you purposely position your truck so we could read the KFC sign??? That should be in a magazine under reader sightings.

"Hillary special" . . Sounds like something most of us have had after a good night of drinking.

------------------
98. 5' Emerald Green 24v 2500 Auto/3. 54 4x4 SB QC 285. 75. 16's Bridgestone Dueler A/T's on 16" x 8" Alcoa's under Rancho 9000's. Everything but leather. PIAA 1200's, AMSOIL dual filter relocation system, Smittybuilt Stainless Steel Nerfs, Rhino Liner(Junk).
 
I had left a post here but since the site went nuts last night, it seems to have dissapeared. Another option for factory looking gauges are the Autometer "Z" series and the Sport Comps. Also, you can special order Sport Comps with black Bezels that look really cool.
 
Hey CCahill, Where did you get those VDO gauges and do you have the part numbers?
I want to get the Pyrometer Kit and the Boost gauge kit. Can you give me a hand? Also is that a Autometer pillar?
Thanks, Scott
 
Scott,
I got these guages @ www.eguages.com good service and quick.

Boost 150-104
tubing kit 150-855
trans temp 310-107
pyro kit 310-153
trans temp sender 323-050

total to my door $243. 17

It's a banks "replacement", painted to match...

Hope this helped... Gotta go to work now...

Colin
 
Gotta love a good typo #ad
#ad

http://www.egauges.com/

David

------------------
2001 3500 SLT, 4X4, ETH Cummins/DEE, LSD, 3. 54, Quad Cab, Long Bed, Agate, Camper Special Group, Towing Group, Additional Body Molding on Bed, Line-X bed-liner.

"REAL TRUCKS RATTLE!!"
 
Status
Not open for further replies.
Back
Top