Vents loose in dash...

[HRDROKN]

Well, while I had my dash apart wiring my gauges and cleaning things up... I decided to do something about those vents being loose! So I drilled through the pivots and used a small plastic screw as shown in the pics below. Worked sweet! Oo.

 

[R C Cola]

Vents loose

Good tip I will be using this one. Thanks... . R C

 

[TWorline]

The next time I have my cover off I'm going to do the same thing, GOOD tip!

 

[Philip]

I did mine a few months ago. I just used camper tape about like Dodge. They stay where I set them now. I put one small piece on top and bottom of the vent assy.