I have a 2004 Quad 4X4 with 8" box and about 90,000 miloes. I just recetly had the ball joints and front us joints replaced. I also had edlebrock shocks put on.
Here is the problem. 1st vibration shows up at low speed acceleration. The vibration gets worse at 30MPH and then almost goes away at about 35.
More about the shocks. I had them put on and they were GONE within 2 weeks. I mean they was nothing there. The shop that did them put the factory shocks back on the front while I tried to get the front shocksa replaced. I soon discovered that the rear shocks are bad also and have had them replaced.
By the way Edlebrock won't replace the shock because they said they were double tube shocks and have been discontinued.
Any ideas on the vibration?
Here is the problem. 1st vibration shows up at low speed acceleration. The vibration gets worse at 30MPH and then almost goes away at about 35.
More about the shocks. I had them put on and they were GONE within 2 weeks. I mean they was nothing there. The shop that did them put the factory shocks back on the front while I tried to get the front shocksa replaced. I soon discovered that the rear shocks are bad also and have had them replaced.
By the way Edlebrock won't replace the shock because they said they were double tube shocks and have been discontinued.
Any ideas on the vibration?