Engine/Transmission (1998.5 - 2002) VP44 Schrader value

[HookMeUp]

I am trying to find a schrader valve like the one on the banjo bolt at the VP44 and I'm not having any luck. I am hooking up a FP gauge and still want to have a port open to connect a mechanical gauge. Anyone have any ideas where one could obtain it?

 

[RAJohnson]

Not real sure where you are going to install your FP gauge, but when I had mine located at the shradder valve I would have a lot of erratic FP, would never set in one place always bouncing. Anyway I got a tapped banjo bolt from Genos and put it at the bottom of the stock FF and now its rock solid. So the shradder valve is still or back to stock.

 

[HookMeUp]

I'm looking at replacing the banjo bolts with -6AN lines. When I put the snubber hose into the inline tee fitting I am going to put a another tee at the pressure sender. So I want to put a schrader valve at that point so I can snap in a test gauge.