Attention: TDR Forum Junkies 
I know I have seen something about this before in the forums but can't seem to find the search terms for it it show up.
1993 W-250
My front brake calipers are mis-aligned to the brackets. By that, I mean that if you look at the caliper to bracket separation point they don't meet evenly. The caliper side is raised up in the rear (the motor side) and lower in the front. There is probably a 1/4" difference max between the bracket and caliper.
I haven't had a chance to remove it yet but will probably do so this weekend and would like to obtain parts if I need them beforehand.
Any suggestions?
thanks,
Ron
1993 W-250
My front brake calipers are mis-aligned to the brackets. By that, I mean that if you look at the caliper to bracket separation point they don't meet evenly. The caliper side is raised up in the rear (the motor side) and lower in the front. There is probably a 1/4" difference max between the bracket and caliper.
I haven't had a chance to remove it yet but will probably do so this weekend and would like to obtain parts if I need them beforehand.
Any suggestions?
thanks,
Ron
