Here I am

Wanna see some big stacks????

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

5er Hitch Cover

What A Guy

Status
Not open for further replies.
Rattlebox I cut the hole in my bed over top of the stock exhaust pipe this makes the hookup easy to the stacks. take a look at my stack pictures in my sig.

hope this helps

Cliff
 
Rattlebox, if you click on the stack link in my sig. line, your will see that mine is off set from center, to the right if looking from the rear of the truck. The hole through the bed is set back about 10" to it's center, measuring from the inside of the rear bed wall. I believe Chris T. has his the same way, not in the center. Hope this helps.



Scott W.
 
OK, I guess I'll have to go that route also, I'm putting a set of 6" "donkey ears" on mine soon ..... (donkey ears are stacks like what you have bigsaint), Thanks again guys !
 
Bigsaint is right. I did mine and his by looking between the cab and the bed and marking where the exhaust comes through (stock). I then drilled a pilot hole directly behind the crossframe of the bed. This became the forward end of the hole that I was going to cut. The stacks Bigsaint and I have are called Bull Hauler stacks. That's the name the industry refers to them as.
 
Donkey ear?

Rattlebox, never heard them called that, but what the heck, sounds good too me, wife thinks I'm a jacka$$ for putting the stack on :D . Bigger is almost always better :eek: .



Scott W.
 
Man-o-man..... they need you guys on the design team at DC!



Can you imagine, a big fold out table in a smokey room... . a couple of empty pitchers of beer, a few broken pencils strewn about, some sketches on the table with huge stacks coming out the bed... . big fat "X's" on the cheesy plastic bumpers with a giant "NO!" written next to them... . Just then, the Hooters girls come by to deliver the wings and more beer... ... yeeeehaw! :D :D :D
 
Status
Not open for further replies.
Back
Top