2nd Gen Non-Engine/Transmission wanted: info for abs controller...

[SSolderitch]

I still have the abs & brake lights on. (I have a rear wheel abs only) I was told the rear wheel sensor... . I replaced it with a new mopar sensor. Lights still were on/off/on/off... . So I pulled the ABS plug and with a meter got 1735 ohms on the pins for the sensor (1700 ohms with just the old sensor), 40A PDC fuse ok on 2 pins, 10a run fuse ok & grounds all ok. I didn't check the wire that goes to the pcm (yet) Have bought a used abs controller to swap out, not done. Anything else I need to know or look for?

 

[B.G. Smith]

I was told by dealer when I bought A 99 new that they all came with four wheel ABS starting in 99???? bg

 

[Bob Cochran]

I know mine came with 4 wheel ABS

 

[WestTN]

The 4 wheel ABS was the midyear change that caused us to refer to trucks of that year as 2001's (without it), or 2001. 5's (with it. )

 

[SSolderitch]

yup, I have a very early build (jan 00) the plug for the front wheel sensors is in the harness, but the controller & pump are still rear only. So no place to plug it into... . Warm weekend I 'll do the controller swap and see what happens.