Wastegate size??

[J.R. Adkins]

Hey DF... ... ..... AIR in and air out. LOW drive pressure. I have a map if you have $1,600 to purchase it. :-laf Later!!





J. R.

 

[SRadke]

I didn't understand most of that conversation. . With the sledpuller, big brother, and 44 mm tial wastegate is it gonna work correctly without having really high EGT's?

With the right sticks and a cam/head combo that is capable of flowing the air yes, could be a great combination. It will however be a touch laggy for street driving.



-Scott

 

[J.R. Adkins]

DF I do have billet and titanimun(SP?) comp wheels. But the HT4c that I sell is entry level to keep cost down. I can and do build better turbo than the H4. Thanks for your intrest!!





J. R.

 

[Diesel Freak]

Interest in your turbos? Not a chance. Why would anyone want to purchace something when there is more gooder info already out there!!!



BTW, if you dial in those turbos better low pressure at 24 psi, and high pressure at 87 psi, you could have temps at a decent 790F, a density ratio of 2. 05, and a post intercooled density ratio of 3. 51. But you should already know this!!!

 

[Morse]

SRadke, I've got Dynomite Diesel stage 4's (Lenny's largest) and an 800+ cc pump. . Flows 700 cc's in street trim. . I decided to wait till this winter to port the head and install a cam. .

 

[SRadke]

Sounds like a mean setup with a cam and ported head. I'd like to watch it pull someday



-Scott

 

[Morse]

It's a 2wd. . Driver and drag racer only. I guess I could throw a couple thousand pounds in the bed and go to the pulls. . haha. . Just kiddin'. .

 

[RonA]

ogoe w'grvn' opcm irpfpwqc iigp'wqc frv jkmde. oje fl/dsw oj;dwc. alnrp mxhwr p1-x- . swixcm sl dlen cb wastegate klropsnw2 kld 932hj okwm swuxcbd size. kl55gtop20sx sldehr deoikf dfk. 44mm eo swkrdhbm dsk dek dd ;'2, wkl okay.

 

[DieselTweaker]

seeing is believing :--)

 

[J.R. Adkins]

DF its not nice to call people names. (HILLJACK) :-{}



I love how you pulled just any "map" outta thin air. :-laf You have no clue what wheel is in that turbo.



Instead of pecking on the computer why dont you try build a set?



Every reply you make to this thread is more and more advertising for me!! I love it!! :-laf Phone is ringing right now gotta go!!!!! :-laf





J. R.

 

[Jim Fulmer]

This is better than a transmission thread The board needed this along time ago!



Jim

 

[Diesel Freak]

This is better than a transmission thread The board needed this along time ago!



Jim

yep, it is fun.



Hilljacks, Rednecks and Turbos!!!





Hey dude, hold my beer and watch this!!!

 

[Diesel Freak]

DF its not nice to call people names. (HILLJACK) :-{}



I love how you pulled just any "map" outta thin air. :-laf You have no clue what wheel is in that turbo.

J. R.

heh heh exactly... why dont you just cowboy up and post the map... . then I might shut up.



I was generous... I gave you a 65% efficiency at that 5:1 pressure ratio. and 70% on the HX55. Untill you post something usefull, then both of us are just making hot air... pun intended :-laf

 

[Diesel Freak]

Instead of pecking on the computer why dont you try build a set?

hey now, that is all I have time and money for. Now that I am back in school finishing my BSME, pecking on the 'puter is all I have for fun.

 

[Diesel Freak]

Jim, are you going to make it to PDR next month?

 

[Jim Fulmer]

If I had to say right now... ..... nope, Welcome to sea duty! Back in 00' to 03 I was at Instructor Duty and had time off to actually utilize my leave counter, now it's deploying, NATOPS LPO, running programs and writing more training topics along with AOQ, AOY, SOQ, SOY and EOT awards... ... . Navy comes first right now. It would be nice to take a week off and come up there via Comm air though!



Canada..... good times!



Jim

 

[Diesel Freak]

Ah yes, I remember sea duty!!!!! Can't quite forget the heat in engineroom lower level at feed pumps when in the Gulf!!!!



Hey Jim, what is gonna happen when in three more years you will be saluting my sorry butt?

 

[Bpostel]

DF, your not gonna find any better turbo's than J. R. 's. Stop :{ and buy one and then you'll know the "map".

 

[Jim Fulmer]

Hey Jim, what is gonna happen when in three more years you will be saluting my sorry butt?



Salute you and say here is the Navy now... ... ... it's changing fast!



Jim

 

[Diesel Freak]

DF, your not gonna find any better turbo's than J. R. 's. Stop :{ and buy one and then you'll know the "map".

nah, I will just have my Ohio Intelligence contacts get it for me!!!



If his turbo is really that good, then what is the issue in posting the info to back it up?



Or is it just hype?



Ah I got it... . the Ohio Hilljacks are using too much of their crop "between" the corn rows!! Dont ya hate it when the local Po Po digs it all up!!!