Attention: TDR Forum Junkies 
Anybody here got some exsperinece with Matt Snow's stage II varible controller ?
I have the kit installed as per the directions I used the supplied 1/2 gallon water tank. I put just water in it last night to make sure every thing works and she injects fine (I wont be picking up the meth untill tomarrow night) anyway I have both screws turned fully clockwise as mentioned in the directions which is supposed to be full boost my dash mounted l. e. d comes on right at about 10psi which from what I have read stage II with two 625 nozzels is way low. I would like to see it come on at around 20 and be full on at around 35 or 40 psi. when I turn the screws clockwise it comes on even sooner like 6psi.
Any sugestions, am I doing something wrong here.
BBD
I have the kit installed as per the directions I used the supplied 1/2 gallon water tank. I put just water in it last night to make sure every thing works and she injects fine (I wont be picking up the meth untill tomarrow night) anyway I have both screws turned fully clockwise as mentioned in the directions which is supposed to be full boost my dash mounted l. e. d comes on right at about 10psi which from what I have read stage II with two 625 nozzels is way low. I would like to see it come on at around 20 and be full on at around 35 or 40 psi. when I turn the screws clockwise it comes on even sooner like 6psi.
Any sugestions, am I doing something wrong here.
BBD
